01 — The line

StarFybr Gen 2: an automated production line.

Line
StarFybr Gen 2, automated
Installed
In the licensee’s own plant
Stages
Prepare, form, finish, pack
Packing
Existing high-speed lines
Talk to us about licensing →
An isometric drawing of the StarFybr Gen 2 production line: preparation, forming presses, a tunnel section and handling, left to right.
StarFybr Gen 2 line layout. Engineering drawing: Evanesce.

Gen 1, in operation

Photographs of the Gen 1 machine. The drawing above is the Gen 2 line licensees install.

02 — Performance

What decides a specification.

  • Rigidity and flexibility

    Rigid, and flexes without cracking.

    Set per application

    What governs rigidity and flexibility

    Does the part hold its shape filled, stacked and handled, and flex without cracking?StarFybr is rigid and flexible, the two properties foam is specified for. How much of each a part has is decided by section thickness, rib geometry and the density of the formed core, all of which are set per part rather than fixed by the material.

  • Insulation and heat

    Insulates; oven, microwave and freezer safe.

    In the technical pack

    What governs insulation and heat

    Will it hold heat in a cup, and go into an oven, a microwave or a freezer?The open core traps air, which is the mechanism insulating foams rely on. StarFybr insulates the way foam does and is oven, microwave and freezer safe. A cup also feels better at the lip than foam. Insulation values depend on section and are established per application.

  • Moisture and condensation

    Governed by surface treatment and skin density.

    In the technical pack

    What governs moisture and condensation

    How does the surface behave against contact moisture?Relevant to hot fills, chilled storage and condensation. Surface treatment and the density of the skin both bear on it.

  • Food and medical contact

    Food-grade and medical-grade.

    In the technical pack

    What governs food and medical contact

    Is it suitable for direct contact with food, or for medical products?StarFybr is food-grade and medical-grade. Approval for a specific application is still granted market by market, and is confirmed during evaluation.

  • Line compatibility

    Trays run on current high-speed packing lines.

    Set per application

    What governs line compatibility

    Will it run on equipment we already have?StarFybr trays run on current high-speed packing lines with no material equipment change. Fit with a specific plant is confirmed during evaluation.

  • 8Patents granted
  • 15Applications pending
  • D6868Meets ASTM

In service

Specified like foam. Served like any other cup.

03 — Compared

The same material, across the range.

The same tray in both materials, on the criteria a specifier checks first, with the other compostable option beside them.

A white expanded polystyrene foam food tray.
The same food tray formed in StarFybr moulded starch.

Styrofoam™ (EPS)

StarFybr

  • After use

    Styrofoam™ (EPS): Stays for centuries

    StarFybr: Composts in under 90 days

    In municipal and industrial composting. Meets ASTM D6868.

  • Rigidity

    Styrofoam™ (EPS): Rigid

    StarFybr: Rigid, flexes without cracking

  • Heat and cold

    Styrofoam™ (EPS): Softens at around 100 °C

    StarFybr: Oven, microwave and freezer safe

  • Inputs

    Styrofoam™ (EPS): Petroleum

    StarFybr: 100% plant-based

  • Packing lines

    Styrofoam™ (EPS): High-speed lines

    StarFybr: The same lines

    Trays, with no material equipment change.

Test conditions and standard
After use

ASTM D6868 is the US standard for compostable coatings on paper and other substrates, composted in municipal and industrial facilities. It covers disintegration, biodegradation, safety and compost quality. The certificate is being confirmed with the issuing body.

Rigidity

Test data in the technical pack. No comparative strength figure is published here until the report behind it is.

Heat and cold

The temperature limits behind that are test data in the technical pack.

Inputs

Starch and fibre left over from food production and harvest, in a formulation that takes a range of them. The detail is in the technical pack.

Packing lines

Stated for trays. Line compatibility is confirmed per plant during evaluation.

And moulded pulp?

The other compostable option. It composts too, but it is less rigid, its heat performance varies, and it is made from single-source pulp.

04 — Form

The part does the work.

The material is constant; the geometry is what is designed. These are the features a formed part uses to carry a load.

Rim
A rolled edge, for the lip.
Base
Set in from the wall, so it stands flat.
Stack
The rims nest, so the cups stack.
Wall
One moulded wall, no seam.

After the last sip

What happens next is the part that matters.

A different approach to end of life

What if the endwasn’t the problem?

Substrates are judged by how they perform in use. What happens afterwards deserves the same attention.

Less than 90

days

Compostable · ASTM D6868

  • Green bin composting
  • Blue bin recyclable

Day 0Day 90

What ASTM D6868 tests

  • Disintegration
  • Biodegradation
  • Safety
  • Compost quality

← Project brief